B00A9A23JM
Paul Component Engineering Rear Hubs. The disc RHUB from Paul Component Engineering is a super wide cassette hub for use on fat bikes with 170mm rear axle spacing.
- Uses Industry Nine's Mountain Freehub
- Freehub tested to withstand up to 700 ft-lbs of torque
- Freehub uses six pawls, each with three engagement points for three degrees/120 points of engagement
- Switch from six to three pawls for even less drag, six degree engagement
- Three sealed hub bearings, plus a 40mm FH bearing
- Easy bearing adjustment with only a 2.5mm allen wrench
- Oversized aluminum QR axle
- Standard 6-bolt rotor flange
- Industry Nine uses a specially ground 61903 Bearing in their cassette body. The OD is 29.5mm instead of the standard sized 30mm OD of all other standard 61903 and 6903 bearings
- Please note that radial lacing voids the manufacturer's warranty
Item Specifications |
---|
Color | Black |
Weight | 430g |
Intended Use | Mountain |
Hub Drilling | 32spokes |
Rear Axle Type | 10x1 |
Cassette Body Type | Shimano 9/10/SRAM |
Hub/Brake Compatibility | 6-Bolt Disc |
Rear Wheel Type | Fat Bike |
Rear Hub Spacing | 170mm |
Skewer Included | No |
Defined Color | Black |
Spoke Type | J-Bend |
Paul Disc RHUB 170mm Rear Hub 32h Black QR,Paul Component Engineering,RHUB
- Product Dimensions: 7.5 x 5.5 x 5.5 inches ; 1.4 pounds
- Shipping Weight:1.4 pounds
Paul+Component+Engineering
I'm 40 and was looking for a bike to ride with my son. Had to buy a new seat with taller seat post. Chromoly frame is nice. May up grade bottom bracket and get a 7 inch rise handle bars for comfortable cruising. We are riding 6-8 mile. Also had to upgrade the tubes in the tires. Great BMX for Dad's.
via:Paul Disc RHUB 170mm Rear Hub 32h Black QR,Paul Component Engineering,RHUB